Bicycle Repair Workshop

Basic Service (Every 3-6 months) $29.95 + parts

• Adjust gears and brakes
• Pump up tyres
• Adjust headset
• Tighten wheel skewers
• Lubricate drive-chain

Nb. If your bike is deemed unsafe after a basis service, you will be phoned regarding any extra repairs or parts that may be required.

General Service (Every 6- 12 months) $57 + parts

• Clean and lubricate drive-chain
• Clean frame
• Adjust gears (front and rear derailleur)
• Cassette lock-ring tightened
• Adjust brakes
• Adjust head-set
• Tighten cranks (remain on)
• Tighten saddle pillar and seat clamp
• Tighten pedals
• Tighten all accessory bolts
• Minor true of wheels
• Adjust / tighten / align wheel skewers
• Inflate tyres
• Assess frame and tyres for possible damage
• Trim and cap cables

Nb. If your bike is deemed unsafe after a General Service, you will be phoned regarding any extra repairs or parts that may be required.

SERVICE CHARGES

The $100 Service (Recommended before major
race or every 12 - 18 months) $100 + parts

• Perform General Service plus the following:
• Remove cranks and tighten bottom bracket
• Remove / degrease / lubricate cassette
• Remove / degrease / lubricate chainrings
• Wheels trued and dished
• Brake cables lubricated (inners & outers)
• Gear cables lubricated (inners & outers)
• Head-set dismantled / cleaned & greased
• MTB - wiper seals lubricated
• MTB - All pivots lubricated

Nb. If your bike is deemed unsafe after a $100 Service, you will be phoned regarding any extra repairs or parts that may be required.

Total Overhaul $199 + extra parts

• Perform $100 Service plus the following:
• Overhaul bottom bracket
• Overhaul front and rear hubs
• Adjust spoke tension
• Install new gear cables (inners & outers)
• Install new brake cables (inners & outers)
• Overhaul head-set - new bearing installed

* Price may vary according to manufacturer of spoke

. General workshop charge per job of $5 covers workshop materials, tools, disposal of old parts, cable ends, ferrules, lubricants and cable ties

All work is carried out by a professional bicycle mechanic.

The workshop uses Park Tools made in the USA.

The Greengrocer believes in a very high standard of professionalism. If for any reason you are not fully satisfied with the work performed on your bike, your money will be refunded.

Back To Top